FURNITURE/AUTO INTERIOR

Fabric furniture, kitchen or dining room chairs, outdoor/patio furniture, cloth auto interior etc.
1. Make sure furniture is dry and clean from greases or oils or any other dirt.
2. Spray 4-6 inches away.
3. Apply an even coat saturating fabric, but not to the point of dripping.
4. For best results, apply a second light coat 30-45 minutes after first coat is applied.
5. Let dry for 24 hours to properly cure onto the fabric for full protection.

NOTE: If furniture is extremely absorbent, another light 3rd coat may be needed to achieve maximum protection. For patio or outdoor furniture it’s best to bring cushions inside out of the elements when not in use for maximum longevity and protection, however if you do leave outside, it’s best to stand cushions up so as not to allow the water to sit and puddle up. Also, it is typically not needed to apply to areas of furniture that won’t be seen or susceptible to staining such as backs or under parts of furniture

FURNITURE/AUTO INTERIOR
Smooth leather furniture or leather auto interior
1. Make sure furniture is dry and clean from greases or oils or any other dirt.
2. Spray 4-6 inches away.
3. Apply an even coat saturating fabric, but not to the point of dripping.
4. Allow to dry and absorb as much as possible for 1-2 minutes.
5. Wipe excess into fabric with a microfiber cloth.
6. For best results, apply a second light coat 30-45 minutes after first coat is applied.
7. Repeat steps 4-5
8. Let fully dry for 24 hours to properly cure onto the fabric for full protection.

 

 

Furniture!